Fleming Mfg. - Mobile Block Plant

$Refractory Mixers$

For more information about the Fleming Mobile Plant, click here.

Fleming Mobile Plant

The Mobile Plant is an affordable solution to on site, mortarless block, paver, and retaining wall production. With the Mobile Plant, we are able to produce up to 1000, 8" x 8" x 16" units per hour and 1600 sq. ft. of pavers per hour! With a FLEMING machine, consistent and exact height control is a plus. Top and bottom vibration and 4-height post probe system ensures high density and accurate products.

The automated plant comes complete with:

Mobile block machinery
Mobile batch plant
Mobile cement silo
Portable generator
2000 production pallets

Keep in mind, the plant can be broken down into smaller elements to reduce startup investment. In some cases, output remains the same and additional labor is all that is needed. FLEMING can also insert renovated equipment to lower the investment and still provide warranties and service as if it were new.

Here's How It Works: Supplying almost 9000 sq. ft. of Interlocking Street Pavers a day to a project 1000 miles away causes no logistical problems for a FLEMING Paver Producer. What is shipped are not the concrete pavers, but only the equipment needed to make them. The 30 tons of machinery is permanently mounted on a 40-foot "low-boy" trailer and ready to be moved to any job site. The process begins with washed raw materials which consist of 6mm. crushed limestone and a clean washed sand. The aggregates, stored in open bunkers in the yard, are collected by a front-end loader and fed into the FLEMING 30 Cubic Foot Plant Mixer. Cement is fed direct from the 20 ton portable silo into the same FLEMING Mixer. Mixing takes about 4 minutes, after which the mix is discharged into the FLEMING Belted Conveyor. The conveyor, full of freshly mixed concrete is then conveyed directly into the feed hopper on top of the FLEMING block making machine. The machine is controlled either manually or automatically by the machines solid state programmer. When the blocks leave the machine on their production pallet, they are collected, 2 pallets at a time, by the FLEMING Auto stacker, which lifts them clear of the production conveyor, withdraws a few feet, and then builds up a stack of palleted blocks on a single forklift truck pallet. Even at this stage the newly pressed blocks are strong enough for each succeeding row of units to be placed directly upon the preceding row. When the cube has reached 18 layers high, it is collected by a forklift truck and carried to a suitable position, where it remains until the following day. No artificial curing is employed, but because of the very dry mix vibration and pressures involved, very high strengths are achieved and the units are ready to be handled the following day. This unique setup is not only capable of producing ASTM Quality Street Pavers, but over a thousand different products with a simple change of molds. Several reasons for producers choosing FLEMING for their equipment needs are: Unmatched Warranty and proven performance Economical and affordable price Nationally acclaimed services